![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
The first part of the cabinet to be assembled is the ledges. Up and down, keep going forward and backward Before gluing the cabinet put everything you need on a wide and flat horizontal surface, the clock moves slowly with the glue applied for making speakers [https://speechmax.ai/ Text to Speech]. So it must move at a steady and efficient speed. Having an extra set of arms for this step is helpful, but not necessary. Apply a thin layer of high-quality wood glue along the edges of all adjacent faces (I like Titebond). Apply more glue to the holes in the cookies in speakers [https://speechmax.ai/ free text to speech]. Use a round brush to apply the glue in place. Then spread the seeds out on a 3/4-inch strip. Put the cookie in the slot and push the cookie down completely. It's not easy to put a biscuit in a bucket, so throw it out and replace it. Sometimes the cookies will swell a little due to the humidity that why audio [https://speechmax.ai/ text to audio converter] is not clear. Cookies are placed and glued to all adjacent surfaces. Ready to assemble Connect the corners to the sides and create a cabinet of speakers and enjoy the audio [https://speechmax.ai/ text to audio]. I use a lot of clamps to pull the cabinet tight and apply even and consistent pressure to the joints. The edges are glued and the clips are loosened in place. It's time to get things right. Use a tape measure and a pair of tweezers to measure diagonally from corner to corner of the rectangle you just created. Then adjust the clamp evenly. This means that the box is completely square. This is time to put all of the panels together before the glue hardens.
